If you have a web site or perhaps an web application, speed is really important. The swifter your website works and also the swifter your applications operate, the better for everyone. Because a site is simply an array of files that communicate with one another, the devices that store and access these files have a huge role in website functionality.
Hard disks, or HDDs, have been, right until the past several years, the most trustworthy devices for storing data. However, in recent years solid–state drives, or SSDs, are already gaining interest. Check out our evaluation chart to check out if HDDs or SSDs are more effective for you.
1. Access Time
With the arrival of SSD drives, data access rates have gone over the top. Because of the brand–new electronic interfaces found in SSD drives, the standard data access time has been reduced into a all–time low of 0.1millisecond.
HDD drives even now take advantage of the exact same basic data file access technique that’s actually created in the 1950s. Although it has been vastly enhanced since then, it’s slower as compared with what SSDs are offering. HDD drives’ data access speed ranges somewhere between 5 and 8 milliseconds.
2. Random I/O Performance
On account of the unique radical data storage strategy embraced by SSDs, they provide speedier file access speeds and swifter random I/O performance.
During Ants Partner Cloud Web Hosting’s tests, all of the SSDs confirmed their ability to work with no less than 6000 IO’s per second.
With an HDD drive, the I/O performance progressively improves the more you use the hard drive. Even so, as soon as it reaches a specific cap, it can’t get swifter. And because of the now–old concept, that I/O limit is noticeably lower than what you could receive with a SSD.
HDD can only go as far as 400 IO’s per second.
The lack of moving parts and rotating disks inside SSD drives, and the recent advancements in electronic interface technology have resulted in a much less risky data file storage device, with a typical failure rate of 0.5%.
As we have noted, HDD drives depend on spinning disks. And something that takes advantage of lots of moving parts for lengthy time frames is vulnerable to failing.
HDD drives’ average rate of failure ranges somewhere between 2% and 5%.
4. Energy Conservation
SSD drives function nearly noiselessly; they don’t make extra warmth; they don’t involve supplemental cooling down alternatives as well as use up far less electricity.
Lab tests have established the normal electrical power intake of an SSD drive is between 2 and 5 watts.
From the time they were developed, HDDs have invariably been really electric power–greedy equipment. When you’ve got a web server with plenty of HDD drives, this will boost the per month utility bill.
Normally, HDDs take in somewhere between 6 and 15 watts.
5. CPU Power
SSD drives enable speedier data access rates, which, in turn, allow the CPU to complete data file requests faster and afterwards to go back to different duties.
The standard I/O wait for SSD drives is simply 1%.
By using an HDD, you’ll have to invest more time waiting around for the results of your file call. This means that the CPU will remain idle for extra time, awaiting the HDD to react.
The normal I/O delay for HDD drives is approximately 7%.
6.Input/Output Request Times
The vast majority of Ants Partner Cloud Web Hosting’s completely new machines now use only SSD drives. Each of our lab tests have demostrated that by using an SSD, the average service time for any I/O request whilst operating a backup remains below 20 ms.
In comparison with SSD drives, HDDs provide noticeably sluggish service times for input/output queries. In a web server backup, the standard service time for any I/O query varies somewhere between 400 and 500 ms.
7. Backup Rates
Referring to back–ups and SSDs – we’ve found an exceptional progress in the backup speed since we moved to SSDs. Right now, a normal server back–up requires only 6 hours.
Through the years, we’ve got worked with mostly HDD drives with our servers and we’re familiar with their efficiency. On a hosting server pre–loaded with HDD drives, an entire server data backup may take about 20 to 24 hours.
- Live Demo
- All of our Virtual Private Servers include no installation costs and operate in a stable network delivering 99.9% of uptime. Full SSH/full root access warranted.
Compare our prices
- Preview the allocations and characteristics offered by our Virtual Private Servers. You can begin with a cheaper VPS Web Hosting setup and upgrade with just a mouse click as your requirements increase.
- Compare our hosting plans
- Get in touch with us 7 days a week by email or by utilizing the extra–fast ticketing system. Our techs are ready to reply to any of your requests within 60 mins.